Single, Volume Controlled, up to 46 m³/h Series SM-SF/CSD

UTILITY

Water softeners are used in order to remove the total hardness of the water and to produce the so-called soft water. This is achieved by passing the water through ion-exchange resin bed, which exchanges the ions of Calcium and Magnesium with Sodium. When reached the pre-selected quantity of water, the system regenerated automatically, by means of salt solution (Sodium Chloride – brine).
The product water – free of hardness – does not cause salt scalings and the entire equipment that uses this water is thus protected.

COMMON APPLICATIONS

• Feed water for boilers or cooling towers.
• Total hardness reduction in water for general use running through distributing networks (industries, hotels, hospitals, buildings, residences etc).
• Any application which requires soft water.

ADVANTAGES

• Fully automated operation / possibility for manual regeneration according to the user’s will
• Automation operates on low voltage (12 VAC) for the personnel’s protection
• Minor pressure drop
• Minimum maintenance cost
• The resin tank is coated with high-density polyethylene, thus it has a high endurance against corrosion
• Electronic control panel
• Selection of the day and time of regeneration
• Brine tank fully equipped for the protection of the softener from the air
• Series SG is intended for softening of hot water up to 85 ^oC

The SM/CSD series designed for small water flow, up to 3,6 m³/h

The SF/CSD series designed for higher water flow

The SFH/CSD series designed for even higher water flow, with external galvanized steel piping

The SMH/CSD series has the same design against SFH/CSD, but external piping constructed from PVC

Finally series SML/ETP4 has the same design against SMH/ETP4, but even higher water flow

Brochure