TEMAK | Greece  Greek / Ελληνικά

Double, Volume Controlled up to 92 m3/h. Parallel Operation

 

UTILITY

 

Water softeners are used in order to remove the total hardness of the water and to produce the so-called soft water. This is achieved by passing the water through ion-exchange resin bed, which exchange the ions of Calcium and Magnesium with Sodium. When reached the pre-selected quantity of water the system is regenerated automatically, by means of salt solution (Sodium Chloride – brine).
The product water – free of hardness – does not cause salt scalings and the entire equipment that uses this water is thus protected.

 

COMMON APPLICATIONS

  • Feed water for boilers or cooling towers.
  • Total hardness reduction in water for general use running through distributing networks (industries, hotels, hospitals, buildings, residences etc).
  • Any application which requires soft water.

ADVANTAGES

Double Softener
  • Due to the parallel operation of two vessels the water flow is the double.
  • Fully automated operation / possibility for manual regeneration according to the user’s will.
  • Automation operates on low voltage (12 VAC) for the personnel’s protection.
  • Minor pressure drop.
  • Minimum maintenance cost.
  • The resin tank is coated with high-density polyethylene, thus it has a high endurance against corrosion.
  • Electronic control panel
  • Volumetric programming in order to avoid unnecessary regenerations.
  • Brine tank fully equipped for the protection of the softener from the air.

 

 

 

The SM/CSD series designed for small water flow, up to 3,6 m3/h

 

 

Model

Operating Capacity
m3*f°H

(each vessel)

Maximum flow
m3/h

(each vessel)

Pressure loss

bar

SM22/CSD 125 2,4 1,1
SM42/CSD 210 3,0 1,2
SM62/CSD 335 3,6 1,2
SM82/CSD 600 3,6 1,2
SM102/CSD 750 3,6 1,2

 

The SF/CSD series designed for higher water flow

 

Model

Operating Capacity
m3*f°H

(each vessel)

Maximum flow
m3/h

(each vessel)

Pressure loss

bar

SF362/CSD 750 10,8 2
SF602/CSD 1100 12,6 2
SF802/CSD 1500 12,6 2
SF1202/CSD 2250 13,2 2
SF1802/CSD 3400 13,2 2
SF2002/CSD 4900 13,2 2

 

 

The SFH/CSD series designed for even higher water flow, with external galvanized steel piping

 

Model

Operating Capacity
m3*f°H

(each vessel)

Maximum flow
m3/h

(each vessel)

Pressure loss

bar

SFH602/CSD 1100 20,4 2
SFH1202/CSD 2250 36 2
SFH1802/CSD 3400 46 2
SFH2002/CSD 4900 46 2

 

 

The SMH/CSD series has the same design against SFH/CSD, but external piping constructed from PVC

 

Model

Operating Capacity
m3*f°H

(each vessel)

Maximum flow
m3/h

(each vessel)

Pressure loss

bar

SMH362/CSD 750 8 1,8
SMH602/CSD 1100 10 1,8
SMH902/CSD 1800 16 1,8
SMH1202/CSD 2400 18 1,8
SMH1802/CSD 3650 20 1,8
SMH2002/CSD 5200 18 1,8

 

 

Finally series SML/CSD has the same design against SMH/CSD, but even higher water flow

 

Model

Operating Capacity
m3*f°H

(each vessel)

Maximum flow
m3/h

(each vessel)

Pressure loss

bar

SML1202/CSD 2400 30 1,8
SML1802/CSD 3670 40 1,8
SML2002/CSD 5200 32 1,8

 

 

 

 

Copyright © 2017 - TEMAK - WATER TREATMENT AND DESALINATION SYSTEMS - FLUID CONTROL EQUIPMENT - CHEMICAL ADDITIVES

Web Developed by: