TEMAK | Greece  Greek / Ελληνικά

Time Controlled, up to 46 m3/h. Series SM-SF/ETP4.

 

UTILITY

Water softeners are used in order to remove the total hardness of the water and to produce the so-called soft water. This is achieved by passing the water through ion-exchange resin bed, which exchange the ions of Calcium and Magnesium with Sodium. When the pre-programmable time reached, the resin is regenerated automatically, by means of salt solution (Sodium Chloride – brine).


The product water – free of hardness – does not cause salt scalings and the entire equipment that uses this water is thus protected.

 

COMMON APPLICATIONS

  • Feed water for boilers or cooling towers.
  • Total hardness reduction in water for general use running through distributing networks (industries, hotels, hospitals, buildings, residences, etc).
  • Any application which requires soft water.

 

ADVANTAGES

Single Softener
  • Fully automated operation / possibility for manual regeneration according to the user’s will.
  • Automation operates on low voltage (12 VAC) for the personnel’s protection.
  • Minor pressure drop.
  • Minimum maintenance cost.
  • Steel resin vessel, internaly and externaly coated with polyethylene film
  • Electronic control panel

The SM/ETP4 series designed for small water flow, up to 3,6 m3/h

 

ModelOperating Capacity
m3*f°H
Maximum flow
m3/h

Pressure loss

bar

SM11/ETP4 70 1,8 0,8
SM21/ETP4 125 2,4 1,1
SM41/ETP4 210 3,0 1,2
SM61/ETP4 335 3,6 1,2
SM81/ETP4 600 3,6 1,2
SM101/ETP4 750 3,6 1,2

 

 

The SF/ETP4 series designed for higher water flow

 

ModelOperating Capacity
m3*f°H
Maximum flow
m3/h

Pressure loss

bar

SF361/ETP4 750 10,8 2
SF601/ETP4 1100 12,6 2
SF801/ETP4 1500 12,6 2
SF1201/ETP4 2250 13,2 2
SF1801/ETP4 3400 13,2 2
SF2001/ETP4 4900 13,2 2

 

 

The SFH/ETP4 series designed for even higher water flow, with external galvanized steel piping

 

ModelOperating Capacity
m3*f°H
Maximum flow
m3/h

Pressure loss

bar

SFH601/ETP4 1100 20,4 2
SFH1201/ETP4 2250 36 2
SFH1801/ETP4 3400 46 2
SFH2001/ETP4 4900 46 2

 

 

The SMH/ETP4 series has the same design against SFH/ETP4, but external piping constructed from PVC

 

ModelOperating Capacity
m3*f°H
Maximum flow
m3/h

Pressure loss

bar

SMH361/ETP4 750 8 1,8
SMH601/ETP4 1100 10 1,8
SMH901/ETP4 1800 16 1,8
SMH1201/ETP4 2400 18 1,8
SMH1801/ETP4 3670 20 1,8
SMH2001/ETP4 5200 18 1,8

 

 

Finally series SML/ETP4 has the same design against SMH/ETP4, but even higher water flow

 

ModelOperating Capacity
m3*f°H
Maximum flow
m3/h

Pressure loss

bar

SML1201/ETP4 2400 30 1,8
SML1801/ETP4 3670 40 1,8
SML2001/ETP4 5200 32 1,8

 

 

Copyright © 2017 - TEMAK - WATER TREATMENT AND DESALINATION SYSTEMS - FLUID CONTROL EQUIPMENT - CHEMICAL ADDITIVES

Web Developed by: