TEMAK | Greece  Greek / Ελληνικά

Automatic deionizers up to 3,3 m3/h. Series DMS-DME.

 

UTILITY

Water demineralizers are used to remove dissolved salts from thw water and to produce the so-called demineralized water. This is achieved by passing the water through two ion-exchange resin beds. When the unit is exhausted, it's regenerated with hydrochloric acid and sodium hydroxide.


The product water – free of salts – complies with world wide standards and does not cause salt scalings, therefore, the entire equipment that uses this water is protected.

 DME

COMMON APPLICATIONS

  • Applicable to the pharmaceutical industry, the electronics industry, hospitals, power stations, ect.
  • Demineralized water with extremely low salt content.
  • Any application which requires demineralized water.

 

ADVANTAGES

  • Automated operation / manual start of regeneration according to the user’s will for series DMS.
  • Automated operation / automatic start up for series DME.
  • Safe low-voltage control for 12V supply.
  • Very low pressure drop.
  • Minimum maintenance cost.
  • The resin tank is coated with high-density polyethylene, thus it has a high endurance against corrosion.
  • Automatic dosing of chemicals.

 

Automatic regeneration, started manually (series DMS).

 

ModelFlow
rate
Minimum
m3/h
Basic
capacity,
m3*foH

Pressure
loss,

bar

DMS 42/CMT1 1,5 140 1,2
DMS 62/CMT1 2 200 1,2
DMS 362/CMT1 2,6 360 2
DMS 602/CMT1 3,3 540 2

 

 

 

Automatic regeneration, started automatically (series DME).

 

ModelFlow
rate
Minimum
m3/h
Basic
capacity,
m3*foH

Pressure
loss,

bar

DME 42 1,5 140 1,2
DME 62 2 200 1,2
DME 362 2,6 360 2
DME 602 3,3 540 2
DME 1202 3,3 1000 2
DME 1802 3,3 1650 2
DME 2002 3,3 2400 2

 

Copyright © 2019 - TEMAK - WATER TREATMENT AND DESALINATION SYSTEMS - FLUID CONTROL EQUIPMENT - CHEMICAL ADDITIVES

Web Developed by: