Automatic Deionizers up to 1,5 m³/h, Series AUTO.

UTILITY

Water demineralizers are used to remove dissolved salts from thw water and to produce the so-called demineralized water. This is achieved by passing the water through two ion-exchange resin beds. When the unit is exhausted, it's regenerated with hydrochloric acid and sodium hydroxide.

The product water – free of salts – complies with world wide standards and does not cause salt scalings, therefore, the entire equipment that uses this water is protected.

COMMON APPLICATIONS

• Applicable to the pharmaceutical industry, the electronics industry, hospitals, power stations, ect.
• Demineralized water with extremely low salt content.
• Any application which requires demineralized water.

ADVANTAGES

• Fully automated operation / possibility for manual regeneration according to the user’s will, by pressing a buton.
• Safe low-voltage control for 24V supply.
• Very low pressure drop.
• Minimum maintenance cost.
• The resin tank is made from reinforced fiber-glass, thus it has a high endurance against corrosion.
• Electronic control panel with an integrated conductivity meter with optical and acoustic alarm signal when the conductivity reach the preseted high limit.
• Automatic regeneration after manuel initiation.

Series AUTO deionizers can offered in four different configurations

• Basic (simple) deionizer
• Additonal electromagnetic valve in outlet pipe
• Additional recirculating pump (recirculation of outlet water to inlet pipe)
• Additiona electromagnetic valve in outlet pipe plus recirculation pump